We use the following types of conformal coating at Arizona ProCoat LLC. Understanding the general characteristics of the common types used in the industry will allow you to make the best choice for your application.


Standards used by the us are IPC610 Rev E, IPC-CC-830, Mil-I-46058C, Mil-P-28809, UL746C, NASA-Std-8739.1A, MIL-C-47175A, IPC7721 and MIL-STD-810G. IP61 to IP68 Ingress Protection ratings for water drips, Sprays, and Immersion. 


Our Vendors/Suppliers are among the best in the world and we are proud to use their products;
 

• Humiseal Chase Coatings
• Dextor Coatings
• Hysol Coatings
• Miller-Stephenson Coatings
• Dow Corning Coatings
• Elastosil Coatings 
• Emmerson Cummings
• Aptek Labs Special Coatings
• Component Blackout Coatings
• Super Corona Dope Coating
• Rubber Coating
• EMI, RFI and RMI Coatings

Acrylic Resin (Type AR)

The common characteristics of Acrylic-type coating includes:

• It dries at room temperature in minutes
• It has desirable electrical and physical properties
• It is fungus resistant
• It has a long pot life
• It also has a low or no exotherm during cure, which prevents damage to heat-sensitive components.
• It is easy to remove
• Dielectric withstands > 1500 Volts
• Its temperature range is -59C to 132C.

Urethane Resin or Polyurethane (Type UR)

The common characteristics of polyurethane-type coating includes:

• It is available in one part, two part, and water-borne
• It provides excellent humidity and chemical resistance, with outstanding dielectric properties for extended periods.
• It requires extended curing time, or baking in a recirculating oven
• It's temperature range is -59C to 132C
• Rework can be completed on small areas by burning through the coating with a soldering iron. However Arizona ProCoat LLC can remove coating perfectly.

Silicone Resin  (Type SR)

The common characteristics of Silicone-type coating include:

• It is useful for high-temperature requirements, typically to 200C
• It provides high humidity and corrosion resistance, with good thermal endurance for high heat-dissipating components.
• It is susceptible to abrasion and has a high co-efficient of thermal expansion
• It is available in 100% solids heat-curing liquids, 100% solids moisture-curing liquids, 100% solids .
• Rework can be completed when chemical strippers are used for coating removal.
• It's temperature range is -65C to 200C